IMD Technology

IMD Panel

IMD Phone Case

IMD Parts

IML Plastic Button

IMD Plastic Case

The process of IML

Cutting material — plane pad printing — ink drying fixed — paste protective film — punching positioning holes — thermoforming — shear peripheral shape — label material injection molding. Specific instructions are as follows.

Cut the rolled film Film into square blocks of designed size for the printing and forming process.

According to the requirements of the icon, text into a film screen, in the cut film Film square block printing icon, text.

The printed film is placed in a high-temperature oven to dry.

To avoid blurring the surface of the printed film when punching the positioning holes, sometimes a single or double layer of protective film needs to be applied (required for products with windows).

Punching the positioning holes on the printed film to ensure the accuracy of the hot pressing position.

After heating the printed film, use a high-pressure machine or copper mold to form it in preheated condition.

Cut off a scrap of the formed three-dimensional film.

Put the film which is the same as the three-dimensional shape of the front mold after molding onto the front mold and inject the finished IML product.